So, if you are struggling with this kind of lock on your PCIe slot, there is nothing new about it. The PCIe latch lock is always going to cause several issues especially when you are working with the bigger graphics cards.
However, some people can easily open or close them with the help of small screwdrivers. We are going to take the advantage of these tools whenever you are stuck in this issue. Putting a lot of stress on your graphics card can end up causing problems with the ports or the motherboard itself. So, you should always make sure to do the smart work here. If you have installed a graphics card that has the darned locks and the clip lock on the motherboard, it is again very easy to take your graphics card out.
You just have to push that lock down and it will free up your graphics card. But, as we discussed earlier, it can become tough when you have a lot of components on your motherboards such as GPU brackets or riser cables.
So, before opening your graphics card, you will have to remove all these things to make a clear way for you. The main area where you should focus your attention is the type of lock you are seeing on your motherboard, If you have a latch-type lock, it can be hard to open and you will need a small screwdriver to remove that lock. Otherwise, in the case of a clip lock, it is good to use your hand and some tools if you are not able to get this thing done with your hand.
However, we can imagine why you are asking this question. In some cases, you may have to buy a new motherboard just because the PCIe slot or its lock is permanently damaged. Using a PCIe lock is crucial because, without this lock, you can make your graphics card stand in its place with the help of its bracket and the screws. But, if there is a little movement on your computer, the graphics card can get outside the port and if you are doing something important, you can end up losing your work.
This can also result in some irreversible damages to other parts of your computer. So, it is never advised to install your graphics card on the motherboard without those PCIe locks at the place. The best way is to use your fingertip to push that PCIe slot lock. But, in some cases, you may not be able to reach your finger at that place. So, some people may also try to put some extra pressure to get your graphics card out from the slot. This is never a good practice to follow.
Then, you can take your graphics card out once it is free from its lock slot and that lock itself. It is very easy to unlock your card if you are working with a less bulky system. In that case, that PCIe slot lock will be easily accessible. So, if you want, you can easily unlock that with your hand without causing any damage to the system. We hope this article would have provided you with enough information about the process of removing the PCIe graphics cards with the darned locks.
If you are not able to do so, make sure not to put a lot of effort into it. You can keep your card in its place and ask someone for help. If you have any other suggestions related to this article, just let us know about them in the comment section. We will be happy to get your feedback on this post. Also, you can tell us about any other article you may want to read here.
We keep coming with regular updates on this website on a regular basis. There are usually one or two PCIe slots closest to the processor, used for graphics cards , followed by one or more PCI slots.
You may have expansion cards installed here already, or they may be empty. If you are having difficulty locating your PCI slots, refer to your motherboard's documentation. Remove the metal bay cover. Each PCI slot will have a bay associated with it on the back of the computer.
When there's nothing installed, the bays are covered by small metal protectors. You can remove one by unscrewing the single screw holding it in place and then lifting it directly out of the case. Set the screw aside. Don't remove any protectors for slots you aren't using, as this will let more dust into the system. Ground yourself. Before handling any computer components, you should ensure that you are properly grounded.
This will prevent an electrostatic discharge, which can damage or destroy sensitive computer components. Grounding yourself with an electrostatic wrist strap is the best way to ensure that you are properly grounded. Connect the wrist strap to the exposed metal of your computer case.
You can also ground yourself by touching a metal water tap. Remove your card from the packaging. Gently remove your new card from the anti-static bag, gripping it by the sides.
Do not touch the contacts along the bottom, and try to avoid touching any of the circuitry. Insert the card. Press the card firmly straight down into the slot. Ensure that the card is level and seated fully in the slot before continuing. If you have the space, leave an open slot between your new card and any existing card. This will help keep your cards and components cooler.
Secure the card. Use the screw that you removed from the metal bay cover and use it to secure the card into the same hole. Tighten the screw firmly but not so tightly that it will strip later. Your card will be suspended horizontally when you set your case back up, so securing it is very important. Close up the computer. Put your computer's side panel back on and secure it. Set the computer back at the workstation and plug all of the cables back in.
Once everything is installed, it will be time to connect your monitors to the graphics card and boot the PC to make sure that you have completed the job correctly.
In most cases, your PC will boot up and you will be ready to move onto the next step. Persistent GPU problems can be addressed by your local computer repair store. Your new GPU will be able to operate without dedicated drivers installed, but you will need to get drivers as soon as possible to get the best performance out of your new graphics card.
Both AMD and Nvidia offer driver downloads on their websites. As you can see, the GPU installation process is a simple one. Most people are capable of carrying out a job like this, and it will be well worth it to enjoy the enhanced performance a new graphics card can bring.
You just need to make sure that you follow these steps carefully to get the best results. If you've been holding off completing your new PC build, the market might be turning in your favor. Having started businesses in the fields of web development and 3D printing, along with working as a writer for many years, Samuel offers a unique insight into the world of technology. Focusing mainly on DIY tech projects, he loves nothing more than sharing fun and exciting ideas that you can try at home.
Outside of work, Samuel can usually be found cycling, playing PC video games, or desperately attempting to communicate with his pet crab. What Is a Graphics Card? Share Share Tweet Email. Get fresh makes, hacks, news, tips and tutorials directly to your inbox, plus access to the next 3D CAD and Printing online training! What are they and how do you assemble everything? Read on! The website for makers and hackers — Arduino, Raspberry Pi, 3D Printing and more Get fresh makes, hacks, news, tips and tutorials directly to your inbox, plus access to the next 3D CAD and Printing online training!
0コメント