Hvl-20dm manual




















Information Addiional. Photograph in wireless flash mode. The displayed battery level is restored to the correct value after the flash has been used a few times. If the battery level is still not restored, replace the battery. Information Additional. Allow it to reach room temperature before removing it from the bag. Keep your camera and spare batteries in a warm inside pocket when shooting in cold weather.

Batteries will regain some of their capacity when warmed to normal operating temperature. Be careful not to bring it into contact with water or sand when using it at the seashore, for example. Contact with water, sand, dust, or salt may result in a malfunction.

Remove this unit from the camera. Clean the flash with a dry soft cloth. If the flash has been in contact with sand, wiping will damage the surface, and it should therefore be cleaned gently using a blower.

In the event of stubborn stains, use a cloth lightly dampened with a mild detergent solution, and then wipe the unit clean with a dry soft cloth. Never use strong solvents, such as thinner or benzine, as these damage the surface finish.

Functions in these operating instructions depend on testing conditions at our firm. Antes de guardar o aparelho deixe-o arrefecer. Painel de controlo Colocar as pilhas Montar e desmontar o flash Flash indirecto Luz de AF Modo de flash sem fios WL Se o fizer, pode provocar uma avaria.

Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.

Enter a new password. English Before operating the product, please read this manual thoroughly and retain it for future reference. Immediately remove the batteries and discontinue use if Care must be taken as burns can occur from touching hot parts. Batteries may become hot or explode due to improper use. Use only the batteries specified in this instruction manual. Do not subject batteries to fire or high temperatures. Do not mix, batteries of different types, brands or ages.

For the customers in the U. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of following measures: — Reorient or relocate the receiving antenna.

Table of contents Features Before use For details, refer to the operating instructions supplied with your camera. Do not place this flash in the following locations Regardless of whether this unit is in use or in storage, do not place it in any of the following locations. This may lead to a malfunction.

Mounting-foot- release button 11 Mounting foot Battery-chamber door 9 Wide panel 21 Remove the protective sheet from the front of the AF illuminator before use. Continued on the next page. Checking Batteries The lamp on the control panel comes on or blinks when the batteries are low. Only lamp blinking Flash cannot be used. Insert new batteries.

Attachment and removal of the flash Attaching the flash to the camera Push the mounting foot firmly onto the camera until it stops. Removing the flash from the camera While pressing the mounting-foot release button 1, remove the flash 2. Power of the flash turns it on. Auto power off When the camera or flash is not used for four minutes, power switches off and control panel indicators disappear automatically to save the batteries.

Program auto flash The basics 1 Select the P mode on the camera. See page 37 for further details. ISO Focal length mm 24 28 35 50 85 Aperture 2.

Recording modes Aperture priority flash photography A 1 Select the A mode on the camera. Shutter speed priority flash photography S 1 Select the S mode on the camera. Basics 4 Press the shutter button when charging is complete.

Manual exposure mode flash photography M 1 Select the M mode on the camera. Zoom flash coverage Auto zoom This flash automatically switches zoom coverage to cover a range of focal lengths from 24 mm to 85 mm when photographing auto zoom. For example : 24 mm When the coverage is set to 28 mm or 50 mm, two lamps come on. Use of the wide panel p.

Manual zoom You can manually set the zoom coverage regardless of the focal length of the lens in use. Press the ZOOM button to display the desired zoom coverage. Wide panel 17 mm zoom angle Attaching the wide panel expands flash coverage to a focal length of 17 mm.

Remember Me? Register Forgot password? What's New? Likes: 0. Results 1 to 5 of 5. Thread Tools Show Printable Version. Looking for any suggestions in getting the screw to turn. The machine is locked in the slowest position right now. There's a good reason for the warnings about changing speed with the phase reversed. Nettoyez-la avec un chiffon doux et sec. Al asegurarse de que este producto se desecha correctamente, Ud. El reciclaje de materiales ayuda a conservar los recursos naturales.

La unidad no posee especificaciones contra el polvo, las salpicaduras ni el agua. Se recomienda tener a mano pilas nuevas de repuesto. Es posible que la unidad no funcione correctamente si se utilizan otros tipos de pilas.

Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. English 12 1. For the customers in the U. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna.

The light allows for more effective lighting of subjects. Caution The unit does not have dust-proof, splash-proof or water-proof specifications.



0コメント

  • 1000 / 1000